Contactless Wash.
Ceramic Protection.
Twenty Minutes.
Two products. Two cannons. No contact washing, no buckets, no complicated setup, with a layer of ceramic protection left behind after every wash.
Most people assume washing a car properly takes time. A bucket, a wash mitt, shampoo, a lot of contact and a lot of effort. This kind of traditional wash cleans the car well but at the same time can also drag dirt and grit across the paintwork. Even small amounts leave fine scratches that accumulate over months and years.
The Krieger + Wolff Ceramic Wash System takes twenty minutes. Two products. Two foam cannons. The first stage breaks down, encapsulates and removes heavy dirt and traffic film. The second removes any remaining contamination while leaving behind a hydrophobic ceramic protection layer. A faster, safer and easier way to maintain your vehicle.
How it works Two Cannons. Two Foams. Done.
The system is built around two foam cannons. One loaded with Pre-Wash Snow Foam, the other with Ceramic Snow Foam. You’re not mixing products mid-wash. You’re not refilling between stages or washing out to use another product. It’s simply Pre-Wash Foam. Rinse. Ceramic Foam. Rinse. Done in twenty minutes.
Pre-Wash loosens, encapsulates and safely removes heavy dirt and traffic film.
Stage one · Five minutes Pre-Wash Snow Foam
Fill the cannon with water and use the built-in measuring cap to add the concentrated Pre-Wash Snow Foam. Pump to build pressure and coat the vehicle from bottom to top. Leave to dwell for 2–3 minutes before rinsing off. No scrubbing. No contact. The foam does the work for you.
It clings to the surface and breaks down road salt, brake dust, grit and traffic film. Despite its cleaning power, the formula is non-caustic and safe for regular maintenance washing on coated and uncoated vehicles alike. As you rinse, it takes the contamination with it. By the time you move to stage two, the majority of harmful dirt and grit is already off the vehicle. You haven’t touched the paint once.
“The number one cause of swirl marks isn’t poor technique - it’s touching contaminated paint.”
Ceramic Snow Foam removes any remaining contamination and leaves a hydrophobic SiO2 protection layer with every wash.
Stage two · Five minutes Ceramic Snow Foam
Using the second foam cannon and the same process as before, coat the car, leave to dwell and rinse. Any remaining contamination will be removed, but the real difference is what it leaves behind.
Ceramic Snow Foam contains hydrophobic SiO2 technology which leaves behind a protective ceramic layer with every wash. It is pH neutral so will not strip any protection already applied. It will only add to it. Used regularly, the protection builds and maintains over time.
The result is a deep gloss finish with genuine hydrophobic performance. Water beads and sheets away more easily, dirt has less to cling to and the vehicle stays cleaner for longer.
The finished result: a clean vehicle, deep gloss, hydrophobic ceramic protection, all in under twenty minutes.
What you get
30-day money-back guarantee.